Coarse flash laser heat transfer film

Clean the base materials such as the photo frame and decorative lines thoroughly. Install the entire roll of Wuxin Technology's coarse flash laser heat transfer film onto the unwinding device of the heat transfer machine, and directly align and adhere the transfer surface of the film to the surface of the base material. Set the temperature and pressure of the heat transfer machine properly, start the machine, and the transfer film will fully cover the surface of the base material along with the operation of the equipment. After the transfer is completed, remove the base film, and a decorative surface with a coarse flash laser effect can be obtained.

1.The texture is a coarse and shiny grainy texture, combined with a laser luster. When the Angle of light changes, it presents a dynamic layering and texture.
2. The colors include metallic tones such as gold, silver and copper, as well as a iridescent laser effect. The colors are transparent and the transitions are natural.
3. It is compatible with various materials such as PS and solid wood. During transfer printing, it can adhere closely to the surface texture of the substrate without any obvious film barrier effect.
4. It has the characteristic of being scratch-resistant and is not prone to scratches during daily contact, thus maintaining the integrity of the surface decorative effect.
5. It has water resistance and is less likely to mold or fall off when exposed to a humid environment, thus maintaining its decorative state.
6. It has good resistance to sun exposure. When exposed to outdoor light for a long time, the color is not prone to obvious fading.

Scope of application: Solid wood picture frames, solid wood photo frames, photo frame lines, decorative lines, foamed decorative lines, PVC/PS picture frames, PVC/PS photo frames, density board photo frames.